Industrial Coatings
Beyond the more typical
architectural coatings, T. L. Hart, Inc. applies a wide array
of industrial-grade coatings suitable for manufacturing and similar
facilities. These types of coatings include various types of
epoxies, urethanes and quick-dry ceiling systems that meet the
rigorous demands of today's industrial environments. Further,
we are able to apply fireproofing systems as well as cementitious
water-proofing and other water-proofing sealants and systems,
like elastomerics.
DRYFALL (QUICK-DRY) CEILING
SYSTEMS
Studies show that better lighting can improve production output,
safety and plant-floor quality inspection, while reducing eyestrain
for workers. That's why work area ceilings should be painted
with bright colors that have a Light Reflectance Value (LRV)
of at least 50 percent. Products specifically made for their
LRV qualities and ease of use should be considered for these
applications. One such product is dryfall. Most dryfall coatings
have LRV's ranging from 76 percent to 83 percent, with some as
high as 86 percent. In addition, dryfall coatings facilitate
the painting process because of their unique fast-dry properties.
Spray applied, the overspray fall-out dries to a dust usually
within eight to ten feet and makes for fast and easy clean-up.
Dryfall coatings come both in solvent based and water based formulations.
The alkyds tend to be cheaper, but emit fumes in the application
and drying process and will yellow and grow brittle with time.
The water based products, though more expensive, eliminate the
problem of odor and retain their LRV for a longer time.
POLYURETHANE
Great for the industrial maintenance market, these products possess
tenacious adhesion and excellent appearance. They are abrasion
resistant, usually rust-inhibitive and great for steel, block
or masonry, and floors.
MOISTURE CURE PRODUCTS
These are paints that rely on atmospheric and surface moisture
to form solid paint films. They are ideal for damp surfaces and
low temperature applications. Moisture-cure urethane may be applied
in humidity up to 99% with no dew point restrictions. They come
in clear or tintable colors. Applications include structural
steel, pipes, cold storage areas, hollow metal and wet areas
of plants and buildings. Clear moisture-cures are also ideal
for coating properly prepared concrete floors.
ALBI CLAD 900 FIREPROOFING
SYSTEMS
Albi Clad 900 is a water-based intumescent mastic fireproofing
material for use wherever interior fireproofing will be exposed
to view. It is a hard, durable, abrasion resistant product that
is actually aesthetic in character. Albi Clad 900 is ideal for
applications in occupied areas or other locations where solvent-based
fireproofing materials cannot be used. Because of its water-based
formulation, Albi Clad 900 is fully compliant with EPA VOC limits
and regulations.
WATER PROOFING SYSTEMS
T. L. Hart applies numerous water proofing systems, including
those manufactured by Debar, Rainguard and Armor Plus. From clear
sealers to those with colored top coats to elastomerics, T. L.
Hart can waterproof your building.
ELASTOMERIC
Elastomeric products are heavy rubber coatings that are designed
to waterproof and decorate exterior surfaces like masonry. They
are extremely flexible (up to 300% elongation) and do not chalk.
ALIPHATIC URETHANE
These products are high performance acrylic coatings which provide
outstanding gloss and color retention, plus excellent abrasion,
chemical and solvent resistance. They are some of the hardest
and most durable coatings on the market. They equal the performance
of baked-on finishes and can be used on metal buildings, chemical
plants, structural supports, heavy equipment, floors or other
surfaces where maximum chemical, solvent and weather resistance
is demanded.
